{"product_id":"hj-wb-holden-gts-dash-pilot-light-cluster-pre-wired-kit","title":"HJ–WB Holden GTS Dash Pilot Light Cluster · Pre-Wired Kit","description":"\u003cp\u003eRunning aftermarket gauges in your \u003cstrong\u003eHJ, HX, HZ or WB Holden GTS dash\u003c\/strong\u003e? The original GTS speedo and tacho have the turn signal and high beam indicators built in, but most aftermarket gauges don't. The Emdawg \u003cstrong\u003eHJWBGTSPLC Pilot Light Cluster\u003c\/strong\u003e puts them back where you can see them.\u003c\/p\u003e\n\u003cp\u003eThe cluster screws straight into the original \u003cstrong\u003eclock position (clock delete)\u003c\/strong\u003e, so there's no drilling or cutting of your GTS fascia, and it stays easy to see even with a sports steering wheel.\u003c\/p\u003e\n\u003cp\u003eIt also brings the GTS fascia's \u003cstrong\u003ebrake and battery warning windows\u003c\/strong\u003e to life. Reproduction GTS dashes come with the globe mounts and lenses, but no globes, sockets or wiring. This kit supplies T5 LED globes and sockets for both. If your car used a single combined \"brake fail \/ hand brake\" light, the cluster lets you separate them into individual warning lights.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e✔ Suits \u003cstrong\u003eHJ, HX, HZ and WB Holden GTS dash fascias\u003c\/strong\u003e (original or reproduction)\u003cbr\u003e✔ Direct screw-in fit. Replaces the original in-dash clock – no cutting or drilling.\u003cbr\u003e✔ Four 12V 14mm LED pilot lights: left \u0026amp; right indicators, high beam and hand brake\u003cbr\u003e✔ Brake fail and battery charge warning lights with T5 LED globes\u003cbr\u003e✔ Battery warning light has a built-in resistor so the alternator charge circuit works properly\u003cbr\u003e✔ Fully pre-wired to an 8-way Deutsch DT connector – plugs straight in at the dash\u003cbr\u003e✔ All-new hardware: chassis, mounting screws and pilot lights\u003cbr\u003e✔ 3D printed from high-temperature engineering-grade filament\u003cbr\u003e✔ Full printed instructions, including converting a non-GTS (Kingswood) dash loom\u003cbr\u003e✔ Designed and made in Australia\u003c\/p\u003e\n\u003ch3\u003ePackage includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Pilot light cluster, pre-wired with 4 x 14mm LED pilot lights\u003c\/li\u003e\n\u003cli\u003e2 x Brake \u0026amp; battery warning light sockets with T5 LED globes\u003c\/li\u003e\n\u003cli\u003e1 x 8-way Deutsch DT connector (car side) with pins\u003c\/li\u003e\n\u003cli\u003e2 x Mounting screws\u003c\/li\u003e\n\u003cli\u003e1 x Printed instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWiring (8-way Deutsch DT)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePin 1 – Ignition key 'ON' (pink)\u003c\/li\u003e\n\u003cli\u003ePin 2 – Ground (black)\u003c\/li\u003e\n\u003cli\u003ePin 3 – Brake fail warning (tan)\u003c\/li\u003e\n\u003cli\u003ePin 4 – Battery charge warning (brown)\u003c\/li\u003e\n\u003cli\u003ePin 5 – Hand brake (yellow)\u003c\/li\u003e\n\u003cli\u003ePin 6 – High beam indicator (light green)\u003c\/li\u003e\n\u003cli\u003ePin 7 – Left indicator (light blue)\u003c\/li\u003e\n\u003cli\u003ePin 8 – Right indicator (dark blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn a Kingswood (non-GTS) dash, the factory pilot light cluster uses a 10-way plug. The manual shows how to rewire it to the new Deutsch connector.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eYou'll need to be confident removing and refitting the instrument cluster and doing automotive wiring. If unsure, have an auto electrician fit it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e basic hand tools, soldering iron or crimp tools, wire cutters\/strippers, a multimeter and a Deutsch crimp tool (or a pre-crimped Deutsch connector with tails).\u003c\/p\u003e\n\u003cp\u003eTest everything before final assembly: plug the cluster in, turn the key to ON (battery light on), check the indicators, high beam and hand brake, then turn to START (brake fail light on). Then mount the cluster in the clock hole with the turn signals on top and refit the fascia.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eHJ, HX, HZ and WB Holdens fitted with a GTS dash fascia (original or reproduction), including Kingswood-to-GTS dash conversions. Gauges and fascia are not included.\u003c\/p\u003e\n\u003cp\u003eWant to supply your own pilot lights and wiring? See the \u003ca href=\"\/en-gb\/products\/hj-wb-holden-gts-dash-pilot-light-cluster-bare-kit\"\u003eHJ–WB Holden GTS Dash Pilot Light Cluster · Bare Kit\u003c\/a\u003e. More parts for your car: \u003ca href=\"\/en-gb\/collections\/hj-wb-holden-parts\"\u003eHJ–WB Holden Parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDesigned and manufactured by \u003cstrong\u003eEmdawg JDM\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Emdawg","offers":[{"title":"Default Title","offer_id":67705445154890,"sku":"HJWBGTSPLC","price":88.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/6232\/0458\/files\/hj-wb-gts-pilot-light-cluster-kit-installed.jpg?v=1792115336","url":"https:\/\/emdawgjdm.com\/en-gb\/products\/hj-wb-holden-gts-dash-pilot-light-cluster-pre-wired-kit","provider":"EMDAWG JDM","version":"1.0","type":"link"}