FAQ

Q) What size are the gauges?
A) Minor gauges are 52mm and Major gauges are 80mm. (SAAS)

SAAS Muscle Series :



*As long as your gauges fall within the specified range, they’ll fit the dash kit. For example, if your minor gauge bezel measures between 8.5mm and 9.5mm, you’re good to go.


Q) Do you make a VK version?
A) We are looking into the feasibility of VK, We should have some more information in 3-4 weeks.

Q) How long will it take to receive my dash?
A) It usually takes around 2 weeks at this stage.

Q) What’s the difference between SAAS Muscle Series 1 , Muscle Series 3, And Muscle Digital?

Look:

  • Series 1:
    The Muscle Series 1 is traditional analogue-looking gauges. There are some subtle differences between them, and even more differences under the hood. The Series 1 has clear needles and a gun metal bezel.

  • Muscle Series 3:
    Muscle Series 3 is traditional analogue-looking gauges. There are some subtle differences between them, and even more differences under the hood. The Series 3 has red needles and a bright aluminum bezel.

  • Muscle Digital
    The Digital gauges are obviously unique. They have a digital readout, plus an analogue progress bar around the perimeter of the dial face. With a grey bezel

Colours:

  • Muscle Series 1:
    Series 1 can be set to Green, Red, Blue and White.

    *Note that the minor gauges lose their colour setting when the battery is removed, and default to green.

  • Muscle Series 3:
    Series 3 can be set to Red, Green, Blue, Purple, White, Amber, Pink, Ice blue, Orange, and Aqua.

  • Muscle Digital:
    Digital can be set to Red, Green, Blue, Purple, White, Amber, Pink, Ice blue, Orange, and Aqua.

Features:

  • Muscle Series 1:
    Speedo and tach have a remote programing button, while the minor gauges have a programing button on the rear.

  • Muscle Series 3:
    Speedo and tach have a remote programing button, while the minor gauges have a programing button on the rear, and an optional remote programming button (supplied).

  • Muscle Digital:
    Speedo and tach have a remote programing button, while the minor gauges have a programing button on the rear, and an optional remote programming button (supplied).

Sensors:

  • Muscle Series 1:
    oil pressure and water temperature sensors are single wire.

  • Muscle Series 3:
    Oiil pressure sensor is 3 wire, and water temperature is a 2 wire sensor.

  • Muscle Digital:
    Oiil pressure sensor is 3 wire, and water temperature is a 2 wire sensor.

In summary, the Series 1 and 3 are visibly similar, while the Digital and Series 3 are electronically similar.

 

Q) How do I connect the dash if I'm running a Sniper?

Our dash comes pre-wired and includes its own oil pressure and water temperature sensors.

For LS engines, the temp sender can be installed on the opposite head—typically the driver’s side rear—or in any available water port. You can also install it using a SAAS adapter in the top radiator hose.

For oil pressure, a dual adapter can be used at the factory port to fit both sensors.

The Sniper tach output wire is compatible with the SAAS tachometer, or you can connect to coil No.1 instead.
If your transmission doesn’t have a VSS (vehicle speed signal), you can use a cable-to-VSS converter or opt for our SAAS GPS speed sensor.