Every RetroTech dash kit for the VB, VC, VH and VK Commodore comes in two versions: one with SAAS Muscle Series 3 gauges (analogue needles) and one with SAAS Muscle Digital gauges (full digital screens). Both are built on the same chassis, have the same functions and cost the same, so the choice is really about the look and how you'll use the car. Here's how they compare.
Quick answer
- Choose Series 3 (analogue) if you want a classic look with real sweeping needles that suits a factory-style or OG build.
- Choose Muscle Digital if you want a modern look, crisp digital readouts and no moving parts, which is ideal for track, off-road or high-vibration builds.
SAAS Muscle Series 3: analogue needles, modern internals
Series 3 gauges have real needles over a classic gauge face, with a small multifunction OLED screen built in.
- Stepper-motor needles, red illuminated, with adjustable angles
- Tacho 0–9,000 RPM with shift light
- Oil pressure 0–140 psi, water temp 40–120°C, volts 8–18V
- Multifunction OLED display for the odometer, shift light, overspeed alert, low fuel warning and more
- Reads at a glance the way a factory dash does: you see the needle's position before you read a number
One owner put it well: he wanted something "kinda OG looking" to suit the style of his VH wagon.
SAAS Muscle Digital: full digital screens
Muscle Digital gauges replace the needles with high-quality OLED screens.
- Crisp, clear digital readouts
- Tacho 0–11,000 RPM with shift light, which suits high-revving engines
- Oil pressure 0–150 psi, water temp 20–120°C, volts 8–18V
- User-set warnings and peak recall
- No moving parts, so nothing to bounce or wear under vibration
- Same multifunction settings: odometer, shift light, overspeed alert, low fuel warning and more
What's the same on both
- A full matching set: 80mm speedo and tacho, plus 52mm oil pressure, water temp, volts and fuel
- 10 backlight colours: red, green, blue, purple, white, amber, pink, ice blue, orange and aqua
- 5 dimming levels, set separately for day and night
- Sensors included: oil pressure, water temp, speed pulse and tacho input
- Remote programming buttons for setup and calibration
- The same RetroTech dash: 3D printed in carbon fibre-reinforced ASA, reinforced with zinc-coated steel, pre-wired with Deutsch DT connectors. VB–VH kits have LED pilot lights for indicators, brake fail and handbrake, and VK kits keep your factory indicator panel
- The same install: bolts in with no cutting or drilling (some wiring changes are needed) and works with carby and non-ECU setups
- The same price for the analogue and digital versions of each kit
Side by side
| Series 3 (analogue) | Muscle Digital | |
|---|---|---|
| Display | Illuminated needles plus OLED info screen | Full OLED screens |
| Look | Classic, factory-style | Modern |
| Moving parts | Needles | None |
| Best for | Restorations, cruisers, OG builds | Track, off-road, high-vibration, modern builds |
| VB–VH kit | Dash Kit 603 | Dash Kit 60D |
| VK kit | Dash Kit 623 | Dash Kit 62D |
Things to think about
How you read your gauges. Many drivers find needles faster to read while moving. You can tell the tacho is near redline from its angle without reading the number. Digital screens are better for exact readings.
The rest of your interior. A factory-style or restored interior usually suits Series 3. A modern-style build with a new wheel, seats and screen often suits Muscle Digital.
How hard the car is used. With no moving parts, Muscle Digital handles corrugations, track days and big vibration from a lumpy cam without any needle bounce.
Mixing ranges. Both ranges use the same gauge sizes, but for a consistent look we recommend sticking with one range across the dash.
Fuel sender. If your tank sender doesn't match the gauge presets, the SAAS fuel sender converter fixes it.
Engineering. If your car is being engineered, check with your engineer before you buy.
The speedo signal (both versions)
Both speedos are electronic, so they need an electronic speed signal. If your gearbox has a speedo cable rather than a speed sensor, you'll need one of these:
- the ESA-01 converter (TH350, TH400 and Powerglide, or with the ESA-02 adapter for Trimatic, M20 and M21), or
- the SAAS GPS speed sensor and antenna, which you can add when you order your kit
See our TH350 electric speedo conversion guide or GPS vs ESA-01 for more.
Shop the gauges
Buying gauges on their own? See SAAS Muscle Series 3 and SAAS Muscle Digital.
Want the chassis only?
Already have gauges, or want a different layout? The bare chassis lets you fit your own: 60X and 63X for VB–VH, and 62X and 65X for VK. Not sure which dash fits your car? See which RetroTech dash kit fits my Commodore.
Still deciding? Get in touch with your model and build plans and we'll help you choose.

