1 10

Emdawg

HJ–WB Holden GTS RetroTech Bare Dash Kit

HJ–WB Holden GTS RetroTech Bare Dash Kit

$231.00 AUD
$330.00 AUD $231.00 AUD
セール 売り切れ

or 4 interest-free payments of $57.75 with Afterpay Learn more

税込み。 配送料はチェックアウト時に計算されます。
Add Pilot Light Set

4 interest-free payments. Choose Afterpay at checkout.

More payment options

⚠ Holiday Notice – Dash Kits on Back Order

Our dash kit workshop is closed while our team is on holiday. All dash kit orders placed now are on back order – manufacturing resumes on 18 November 2026. After that date, please allow our usual made-to-order time of approximately 5–10 business days for production and dispatch. You can still order now to secure your kit in the queue.

Fits: HJ, HX, HZ & WB Holden with a GTS dash fascia (original or reproduction). GTS fascia not included.

What's in the box:

  • 3D-printed left & right main gauge pods (80mm)
  • 4-gauge auxiliary pod & mount (52mm)
  • Pilot light cluster housing (clock delete)
  • 2 x T5 warning light sockets with wires
  • Mounting screws & printed instructions
  • Gauges & pilot lights not included – designed for SAAS Muscle Series 3 gauges & 14mm pilot lights
  • Optional pilot light set (+$65): 4 x 14mm LED pilot lights (loose), 2 x T5 LED globes & 80 ohm resistor

Install: Allow more time than a complete kit – you mount and wire your own gauges and pilot lights, machine the two lower auxiliary gauge bezels for clearance and trim the two lower cluster mounting posts. Tools: basic hand tools, multimeter, crimp/solder tools and a die grinder or Dremel. Full instructions supplied. If you're unsure with wiring, use an auto electrician.

Popular add-ons:

Building an HJ, HX, HZ or WB Holden GTS dash and want to fit and wire your own gauges? The Emdawg RetroTech HJWBGTSX Bare Dash Kit gives you all the 3D-printed mounting parts you need to run SAAS Muscle Series 3 gauges behind a GTS fascia, without the original GTS instruments.

It's the same chassis used in our complete HJ–WB GTS Dash Kit, supplied bare so you can source your own gauges and pilot lights.

✅ Vehicle Fitment

  • HJ, HX, HZ and WB Holden fitted with a GTS dash fascia (original or reproduction)
  • Made for Kingswood (non-GTS) to GTS dash conversions
  • GTS dash fascia not included

✅ What's in the Kit

  • Left and right main gauge pods (80mm)
  • 4-gauge auxiliary pod and auxiliary gauge mount (52mm)
  • Pilot light cluster housing for the clock position (clock delete): left and right indicators, high beam and hand brake
  • 2 x T5 warning light sockets with wires for the GTS fascia's brake fail and battery charge windows
  • Mounting screws
  • Full printed installation manual
  • Gauges, 14mm pilot lights, wiring connectors and fascia are not included

✅ Optional Pilot Light Set (+$65)

Add our pilot light set to light up the cluster and the fascia's warning windows:

  • 4 x 12V 14mm LED pilot lights (supplied loose): left and right indicators, high beam and hand brake
  • 2 x T5 LED globes for the brake fail and battery charge warning lights
  • 80 ohm resistor for the battery charge warning light, so the alternator charge circuit works properly

Prefer it fully assembled? Our pre-wired GTS pilot light cluster comes wired to a Deutsch plug.

✅ Built for SAAS Muscle Series 3 Gauges

The pods are designed around SAAS Muscle Series 3 gauges: 80mm speedo and tacho, and four 52mm auxiliary gauges. Other gauges with the same dimensions may fit, but we can't guarantee every brand. The pilot light housing suits most 14mm pilot lights. If you're unsure, contact us before ordering.

✅ Installation

  • The two lower auxiliary gauge bezels need machining for clearance, and a few millimetres are trimmed from the two lower mounting posts on the cluster's aluminium mount. The manual shows how
  • You mount and wire your own gauges and pilot lights, so allow more time than our complete kit
  • Tools: basic hand tools, a multimeter, soldering or crimp tools, wire strippers, and a die grinder or Dremel for the clearance work
  • The manual covers removing the old cluster, the clearance work, wiring from a Kingswood dash, start-up checks and troubleshooting

You'll need to be confident removing the instrument cluster and doing automotive wiring. If unsure, have an auto electrician fit it.

✅ Popular Add-ons

✅ Designed & Made in Australia

Designed and made in Australia by Emdawg JDM. Got questions or need a custom fit? Get in touch at emdawgdrift@gmail.com before you order.

詳細を表示する